How to Enable Custom OSD on DJI V2 Glasses

I. Principle

V2 glasses support custom OSD (On-Screen Display), but must be switched to DJI Digital FPV System mode to enable it. After enabling this feature, flight data such as voltage, RSSI, flight mode, etc., can be displayed on the screen, enhancing the FPV experience.

II. Equipment Preparation

FPV Goggles: DJI FPV Goggles V2
FPV Video Transmitter: DJI AIR UNIT / Caddx Vista (compatible with DJI Digital FPV System)

III. Detailed Instructions

Step 1: Switch to DJI Digital FPV System

1. Turn on V2 goggles and ensure the device has started normally.
2. Use the joystick to enter the settings menu.
3. In System Settings, select DJI Digital FPV System.
   
4. Confirm the switch and restart the device to complete the mode conversion.
   Step 2: Enable Custom OSD
5. Enter the V2 goggles' settings menu and find the "Display" option.
   
6. On the Display Settings page, find the "Custom OSD" option.
   
7. Select and enable "Custom OSD".
   

III. Q&A

Q: What if I can't find the "Custom OSD" option?
A:

• Ensure you have switched to DJI Digital FPV System; this option will not appear in other modes.
• Try restarting the V2 goggles; in some cases, settings changes require a restart to take effect.
• Ensure the goggles firmware is the latest version; some older firmware may lack this feature.
  Q: Custom OSD is enabled but still not displaying?
  A:
• Enter the flight controller software (INAV) and ensure OSD data output is enabled.
• Check if the connection from the flight controller to the VTX is correct and ensure OSD serial output is enabled.
• Try resetting the OSD settings and re-selecting and enabling the required OSD elements.
  Q: How to customize OSD display content?
  A:
• In the OSD tab of INAV Configurator, select the information you want to display (battery voltage, RSSI, flight mode, etc.).
• Adjust the position of OSD elements to make the information display clearer.
• Save the settings and restart the device to confirm the OSD changes have taken effect.

Technical Support QR Code