Monochrome Remote Controller Curve Function

1. Curves

Curves screen allows you to define custom curves for use in the input, mix, or output screens. The curves screen will display the configured custom curves and provide a graphical representation of each curve.
Curves screen:

Selecting one of the curves or an empty curve slot will open the configuration page for that curve.
Curve configuration screen:

1.1 Curve Configuration

The curve configuration screen has the following configurable options:

• Name - Name of the curve. Only 3 characters can be used.
• Type - Curve type: Options are standard and custom
  • Standard - Horizontal axis points are fixed values based on point number. Vertical axis points are adjustable.
  • Custom - Both horizontal and vertical axes are adjustable.
• Point count - Number of points in the curve. Press the [Enter] button to modify the point count. Long press the [Enter] button to provide the following additional options:
  • Preset - Allows you to set the curve to a preset slope value (-45 to 45 degrees, in 15-degree increments). The curve will have 5 points, and smooth is not enabled by default.
  • Mirror - Mirror the selected curve.
  • Clear - Clear all curve values for the selected curve.
• Smooth - When enabled, connects points with curves instead of straight lines.

1.2 Editing Curve Points

Edit curve points popup window:

After the last configuration option (Smooth), you will automatically start scrolling through the configured points on the curve. To change the value of a point, press the [Enter] button, then adjust the value as needed.
For Standard curves, you can only adjust the Y value. For Custom curves, you can adjust both X and Y values.
——This article is cited from the EdgeTX User Manual: https://zkl2333.gitbook.io/edgetx-user-manual/bw-radios/model-select/curves**