Exporting and Importing Flight Controller Configuration Parameters

Important

Note: Mission Planner 1.3.82 may experience lag when exporting logs. It is recommended to use Mission Planner 1.3.81 for log export!!!

I. Principle

The parameters of an ArduPilot flight controller can be exported and imported via the Mission Planner ground control station (GCS), facilitating the migration of parameter configurations between different flight controllers or backing up current settings before adjusting flight parameters for recovery.
Main Application Scenarios:

• Migrate Flight Controller Configuration: Quickly apply existing parameters when replacing a flight controller or copying settings for the same type of aircraft.
• Backup Current Configuration: Save current settings before adjusting parameters to prevent issues caused by accidental operations.
• Restore Default Settings: Quickly restore previous stable parameters when aircraft debugging fails.

II. Equipment Preparation

1) Flight Controller: Any of the SpeedyBee F405 WING APP / SpeedyBee F405 WING MINI / CoreWing F405 WING V2 flight controllers is applicable to this tutorial.
2) Ground Station: Mission Planner ground control station (GCS)

III. Specific Operations

1. Export Flight Controller Parameters

1. Enter the Configuration/Debug page.
2. Enter the All Parameters table.
3. Click Save.
4. Name and save the parameters.
   

Important

✅ The exported parameter file can be used to restore configuration later or imported onto other flight controllers.

2. Import Flight Controller Parameters

1. Enter the Configuration/Debug page.
2. Enter the All Parameters table.
3. Click Save.
4. Select and open the parameter file.
   

Important

Click "Write Parameters" and reboot the flight controller.

IV. Q&A

Technical Support QR Code