SpeedyBee F405 WING APP BLE Connection Guide
I. Principle
The SpeedyBee F405 WING APP flight controller supports BLE connection mode and can connect to the SpeedyBee APP / INAV ground control station (GCS).
The SpeedyBee APP supports an expert mode under INAV firmware. In this mode, users can access all INAV firmware features for in-depth operations and configuration. The aircraft parameters can be fully configured using only a smartphone, making outdoor flying more convenient.
II. Device Preparation
1. Flight Controller Equipment
- SpeedyBee F405 WING APP flight controller - flashed with INAV firmware
How to update the flight controller firmware - using INAV ground control station: https://docs.corewing.com/plane/beforetuning/inav-fw-update.html
2. Mobile Devices - Android device - with the latest version of SpeedyBee APP software installed.
- Computer device - Windows 10 or higher, with INAV series 6 ground control station or INAV series 7 ground control station installed.
Important
SpeedyBee APP download link: https://www.speedybee.cn/speedybee-app.html
3. Power Supply
2-6S LiPo battery to power the flight controller.
III. Specific Operations
3.1 Mode Switching
Power the flight controller with a battery, press and hold the BOOT button for about 6 seconds until the wireless status indicator shows a slow green flash. At this point, the wireless board has entered BLE mode.
3.2 Ground Control Station Software Settings
SpeedyBee APP:
Enable phone Bluetooth, open SpeedyBee APP, and connect to the flight controller as shown in the diagram.
INAV Ground Control Station:
Enable computer Bluetooth, open INAV 地面站, and connect to the flight controller as shown in the diagram.
IV. Q&A
Q: Why can't my SpeedyBee APP find the SpeedyBee F405W-BLE device?
A: Please ensure the flight controller wireless board has entered BLE mode (the wireless status indicator is blue). If it still cannot be found, try restarting the Bluetooth functions on both the flight controller and the computer.
Technical Support QR Code
